Angular Contact Ball Bearings
In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.
- Toyana 7238 B-UX angular contact ball bearings
- 1.5000 in
- 4020 lbf
- SNR TGB35111 angular contact ball bearings
- 60 mm
- Powder Coat
- 120 mm x 260 mm x 55 mm 120 mm x 260 mm x 55 mm FAG 7324-B-TVP angular contact ball bearings
- Sintered Bronze Oil-Impregnated
- 9001:2008 & 14001:2004
- Toyana 71917 C-UX angular contact ball bearings
- 1.1250 in
- 2150 lbf
- 95 mm x 170 mm x 32 mm 95 mm x 170 mm x 32 mm SKF 7219 BECBM angular contact ball bearings
- Oil-Impregnated Bronze
- Static 8000 / Dynamic 2000 (psi)