NSK bearing Trading Co., Ltd

Angular Contact Ball Bearings

In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.

This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.

1000,000 mm x 1420,000 mm x 260,000 mm 1000,000 mm x 1420,000 mm x 260,000 mm NTN SF20001DF angular contact ball bearings: shaft diameter: : 1.9690 in; typical application: : Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che

70 mm x 110 mm x 20 mm 70 mm x 110 mm x 20 mm SKF S7014 ACE/HCP4A angular contact ball bearings: shaft diameter: : 2.8125 in; typical application: : Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che

35 mm x 55 mm x 10 mm 35 mm x 55 mm x 10 mm ISO 71907 C angular contact ball bearings: d : 3.4375 in; base width: : 3.4100 in

NTN HUB156-37 angular contact ball bearings: d : 24 mm; bearing material: : 52100 Chrome Steel

50 mm x 72 mm x 12 mm 50 mm x 72 mm x 12 mm SNFA VEB 50 /NS 7CE3 angular contact ball bearings: shaft diameter: : 2.7500 in; typical application: : Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che

45 mm x 58 mm x 7 mm 45 mm x 58 mm x 7 mm SNFA SEA45 7CE3 angular contact ball bearings: d : 2.9375 in; base width: : 3.3800 in

127 mm x 254 mm x 50,8 mm 127 mm x 254 mm x 50,8 mm SIGMA MJT 5 angular contact ball bearings: shaft diameter: : 1.3750 in; typical application: : Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che

Toyana 7020 C-UO angular contact ball bearings: d : 3.1875 in; base width: : 3.7500 in

28,575 mm x 63,5 mm x 15,875 mm 28,575 mm x 63,5 mm x 15,875 mm RHP LJT1.1/8 angular contact ball bearings: d : 55 mm; radial dynamic load capacity: : 4400 kgf

45 mm x 85 mm x 30,2 mm 45 mm x 85 mm x 30,2 mm FAG 3209-BD-TVH angular contact ball bearings: mounting: : Two-Bolt Base; B : 4-61/64 in

ISO 7040 CDF angular contact ball bearings: d : 3.9375 in; expansion type: : Non-Expansion Bearing (Fixed)

40 mm x 90 mm x 23 mm 40 mm x 90 mm x 23 mm NACHI 7308CDT angular contact ball bearings: d : 50 mm; radial dynamic load capacity: : 2150 lbf