NSK bearing Trading Co., Ltd

Angular Contact Ball Bearings

In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.

This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.

50 mm x 90 mm x 30,2 mm 50 mm x 90 mm x 30,2 mm SKF E2.3210A-2Z angular contact ball bearings: d : 70 mm; base width: : 2.9900 in

30 mm x 72 mm x 30,2 mm 30 mm x 72 mm x 30,2 mm FAG 3306-B-2RSR-TVH angular contact ball bearings: d : 2.4375 in; locking device: : Double V-Lock

40 mm x 62 mm x 12 mm 40 mm x 62 mm x 12 mm SNFA VEB 40 /NS 7CE3 angular contact ball bearings: d : 2.9375 in; base width: : 3.0000 in

Toyana 7226 C-UO angular contact ball bearings: d : 1/2 in; maximum pv value: : 50000

340 mm x 620 mm x 118 mm 340 mm x 620 mm x 118 mm ISB QJ 1268 angular contact ball bearings: d : 0.6250 in; radial static load capacity: : 17300 lb

70 mm x 110 mm x 20 mm 70 mm x 110 mm x 20 mm SKF 7014 ACE/P4AL1 angular contact ball bearings: mounting: : Two-Bolt Base; finish/coating: : Uncoated

Toyana 7072 B-UO angular contact ball bearings: d : 85 mm; radial dynamic load capacity: : 2150 lbf

170 mm x 360 mm x 72 mm 170 mm x 360 mm x 72 mm KOYO 7334 angular contact ball bearings: d : 0.2500 in; outer ring material: : Steel

200 mm x 310 mm x 51 mm 200 mm x 310 mm x 51 mm FAG B7040-E-T-P4S angular contact ball bearings: d : 1.2500 in; B : 4.4375 in

10 mm x 30 mm x 9 mm 10 mm x 30 mm x 9 mm SKF SS7200 ACD/P4A angular contact ball bearings: d : 90 mm; static load capacity: : 74000 N

35 mm x 80 mm x 34,9 mm 35 mm x 80 mm x 34,9 mm ZEN S5307-2RS angular contact ball bearings: d : 1.6250 in; locking device: : Set Screw

35 mm x 80 mm x 21 mm 35 mm x 80 mm x 21 mm ISO 7307 B angular contact ball bearings: d : 50 mm; material / coating: : Carbon Steel

◂ Previous page Next page ▸

All Products Contact Now