NSK bearing Trading Co., Ltd

Angular Contact Ball Bearings

In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.

This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.

190 mm x 340 mm x 55 mm 190 mm x 340 mm x 55 mm NACHI 7238B angular contact ball bearings: compatible bore diameter: : 85 mm, 80 mm, 90 mm, 3.5000 in, 3.2500 in, 3.4375 in, 3.1875 in; material: : Steel

90 mm x 190 mm x 43 mm 90 mm x 190 mm x 43 mm NACHI 7318DB angular contact ball bearings: d : 1.0000 in; radial dynamic load capacity: : 2430 lbf

40 mm x 52 mm x 7 mm 40 mm x 52 mm x 7 mm CYSD 7808C angular contact ball bearings: d : 90 mm; radial dynamic load capacity: : 14600 kgf

10 mm x 30 mm x 9 mm 10 mm x 30 mm x 9 mm SNFA E 210 /S/NS /S 7CE1 angular contact ball bearings: d : 0.7500 in; axial static load capacity: : 1400 lb

160 mm x 290 mm x 48 mm 160 mm x 290 mm x 48 mm NACHI 7232CDT angular contact ball bearings: d : 1.6250 in; radial dynamic load capacity: : 7420 lbf

120 mm x 165 mm x 22 mm 120 mm x 165 mm x 22 mm CYSD 7924DT angular contact ball bearings: d : 0.6250 in; axial static load capacity: : 1000 lb

Timken 541DTVL731 angular contact ball bearings: d : 0.4375 in; axial static load capacity: : 650 lb

25 mm x 60 mm x 27 mm 25 mm x 60 mm x 27 mm NSK BD25-49NX angular contact ball bearings: mounting: : Tapped Base; B : 1-13/32 in

50 mm x 90 mm x 30,2 mm 50 mm x 90 mm x 30,2 mm ZEN S3210-2RS angular contact ball bearings: d : 0.7500 in; radial dynamic load capacity: : 2890 lbf

60 mm x 130 mm x 31 mm 60 mm x 130 mm x 31 mm CYSD 7312CDF angular contact ball bearings: d : 80 mm; row type & fill slot: : Single Row Non-Fill Slot

55 mm x 100 mm x 21 mm 55 mm x 100 mm x 21 mm SKF 7211 ACD/HCP4A angular contact ball bearings: d : 8 mm; ball material: : 52100 BEARING STEEL HEAT TREATED CHROME PLATE

38 mm x 72 mm x 34 mm 38 mm x 72 mm x 34 mm FAG FW925 angular contact ball bearings: d : 0.6250 in; axial static load capacity: : 1000 lb