Deep Groove Ball Bearings
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
- Toyana 6315 deep groove ball bearings
- Tapped Base
- 1-15/16 in
- 280 mm x 500 mm x 80 mm 280 mm x 500 mm x 80 mm NSK 6256 deep groove ball bearings
- 1.3750 in
- Contact with Slinger