NSK bearing Trading Co., Ltd

Deep Groove Ball Bearings

Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

50 mm x 110 mm x 61 mm 50 mm x 110 mm x 61 mm FYH UC310 deep groove ball bearings: d : 1.5000 in; overall length: : 5-1/8 in

AST SRW166ZZ deep groove ball bearings: d : 40 mm; locking device: : Set Screw

20 mm x 52 mm x 12 mm 20 mm x 52 mm x 12 mm NTN SC04A47CS24PX1/3AS deep groove ball bearings: d : 60 mm; radial dynamic load capacity: : 8300 kgf

15 mm x 35 mm x 11 mm 15 mm x 35 mm x 11 mm SKF 6202-2Z/VA228 deep groove ball bearings: d : 12.7 mm; closure type: : Double Shielded

25,4 mm x 52 mm x 27 mm 25,4 mm x 52 mm x 27 mm KOYO SB205-16 deep groove ball bearings: d : 35 mm; radial dynamic load capacity: : 2150 lbf

150 mm x 190 mm x 20 mm 150 mm x 190 mm x 20 mm SIGMA 61830M deep groove ball bearings: d : 45 mm; locking device: : Set Screw

8,000 mm x 16,000 mm x 5,000 mm 8,000 mm x 16,000 mm x 5,000 mm NTN SC866ZZ deep groove ball bearings: d : 2.0000 in; radial static load capacity: : 5220 lbf

8 mm x 24 mm x 7 mm 8 mm x 24 mm x 7 mm NSK E 8 deep groove ball bearings: material: : Wear-Resistant Copper Alloy; operating temperature range: : -40 to +302 °F

50 mm x 72 mm x 12 mm 50 mm x 72 mm x 12 mm KOYO 6910 deep groove ball bearings: d : 70 mm; radial dynamic load capacity: : 6350 kgf

85 mm x 180 mm x 41 mm 85 mm x 180 mm x 41 mm Timken 317WD deep groove ball bearings: d : 12 mm; radial dynamic load capacity: : 2150 lbf

480 mm x 600 mm x 56 mm 480 mm x 600 mm x 56 mm ISO 61896 deep groove ball bearings: d : 1.0000 in; radial dynamic load capacity: : 2680 lbf

17 mm x 62 mm x 20 mm 17 mm x 62 mm x 20 mm NSK B17-127 deep groove ball bearings: mounting: : Two-Bolt Base; B : 2-13/64 in