Deep Groove Ball Bearings
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
- 4 mm x 13 mm x 5 mm 4 mm x 13 mm x 5 mm FAG 624-2RSR deep groove ball bearings
- 1.2500 in
- Dual Lip with Slinger
- 55 mm x 100 mm x 32,6 mm 55 mm x 100 mm x 32,6 mm SKF YET211 deep groove ball bearings
- 3/8 in, 5/16 in, 1/8 in, 1/4 in, 1/2 in, 3/16 in
- Steel
- 55 mm x 100 mm x 71,3 mm 55 mm x 100 mm x 71,3 mm SNR EX211 deep groove ball bearings
- 4.3750 in
- 52100 Bearing Steel
- 15 mm x 40 mm x 22 mm 15 mm x 40 mm x 22 mm FYH SB202 deep groove ball bearings
- 2.9375 in
- Contact Seal
- 12 mm x 32 mm x 14 mm 12 mm x 32 mm x 14 mm ISB 62201-2RS deep groove ball bearings
- 3-1/2 in
- Expansion Bearing (Floating)