Deep Groove Ball Bearings
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
- 25 mm x 42 mm x 9 mm 25 mm x 42 mm x 9 mm NACHI 6905-2NKE deep groove ball bearings
- 2.2500 in
- Non-Expansion Bearing (Fixed)
- Toyana 6209 ZZ deep groove ball bearings
- 30 mm
- 108 mm
- Toyana 1680208 deep groove ball bearings
- 2.4375 in
- Double V-Lock
- Toyana 618/530 deep groove ball bearings
- Two-Bolt Base
- Uncoated
- 35 mm x 62 mm x 14 mm 35 mm x 62 mm x 14 mm NSK 6007L11ZZ deep groove ball bearings
- 3.2500 in
- 053893630243
- 25 mm x 62 mm x 24 mm 25 mm x 62 mm x 24 mm Fersa 62305-2RS deep groove ball bearings
- 6.0000 in
- Class 3 (Precision) Tolerance
- 17 mm x 40 mm x 12 mm 17 mm x 40 mm x 12 mm FBJ 88503 deep groove ball bearings
- 4.9375 in
- 196000 lb