Thrust Ball Bearings
Thrust ball bearings are manufactured as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load. In addition to the bearings presented in this section, SKF supplies thrust ball bearings for special application requirements.
Thrust bearings are a specialized type of bearing designed to handle axial stresses while allowing rotary motion between two different moving parts. Thrust, in this case, actually refers to the axial loads under which such bearings are designed to operate. Some of the different types of thrust bearing include ball, roller, fluid and magnetic.
- Toyana 51309 thrust ball bearings
- 0.1900 in
- 200 lb
- INA 4405 thrust ball bearings
- 7/8 in
- Maximum of +250 °F
- 25 mm x 62 mm x 17 mm 25 mm x 62 mm x 17 mm SKF NUP 305 ECNP thrust ball bearings
- 25 mm
- Galvanized Steel
- 40 mm x 80 mm x 18 mm 40 mm x 80 mm x 18 mm SKF NJ 208 ECP thrust ball bearings
- 2.9375 in
- 3.0000 in
- 35 mm x 72 mm x 17 mm 35 mm x 72 mm x 17 mm SKF NU 207 ECM thrust ball bearings
- 1-7/16 in
- Set Screw
- NTN 51236 thrust ball bearings
- 7.0000 in
- Class 3 (Precision) Tolerance
- 30 mm x 62 mm x 16 mm 30 mm x 62 mm x 16 mm SKF NU 206 ECP thrust ball bearings
- 2.5000 in
- Non-Expansion Bearing (Fixed)
- AST 51305 thrust ball bearings
- 2.6875 in
- Non-Expansion Bearing (Fixed)
- NTN 81268 thrust ball bearings
- 1.4375 in
- Cast Iron
- INA VLI 20 0744 N thrust ball bearings
- 1.9375 in
- 2-1/2 in