Angular Contact Ball Bearings
In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.
- Toyana 71928 C-UX angular contact ball bearings
- Tapped Base
- 3-27/64 in
- 8 mm x 24 mm x 8 mm 8 mm x 24 mm x 8 mm NSK 728A angular contact ball bearings
- 3.0000 in
- 3.0000 in
- 55 mm x 100 mm x 21 mm 55 mm x 100 mm x 21 mm CYSD 7211BDT angular contact ball bearings
- 1.7500 in
- Non-Metallic Bushing
- 70 mm x 125 mm x 24 mm 70 mm x 125 mm x 24 mm SIGMA 7214-B angular contact ball bearings
- 1 in
- Maximum of +800 °F