Deep Groove Ball Bearings
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
- 50 mm x 110 mm x 27 mm 50 mm x 110 mm x 27 mm NKE 6310-2Z-N deep groove ball bearings
- Two-Bolt Base
- Uncoated
- Toyana 61909-2RS deep groove ball bearings
- 2.5000 in
- 2.9000 in
- 10 mm x 22 mm x 6 mm 10 mm x 22 mm x 6 mm NACHI 6900ZE deep groove ball bearings
- 2.4375 in
- 2.7000 in