Angular Contact Ball Bearings
In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.
- 190 mm x 340 mm x 55 mm 190 mm x 340 mm x 55 mm NACHI 7238B angular contact ball bearings
- 85 mm, 80 mm, 90 mm, 3.5000 in, 3.2500 in, 3.4375 in, 3.1875 in
- Steel
- Timken 541DTVL731 angular contact ball bearings
- 0.4375 in
- 650 lb
- 25 mm x 60 mm x 27 mm 25 mm x 60 mm x 27 mm NSK BD25-49NX angular contact ball bearings
- Tapped Base
- 1-13/32 in
- 60 mm x 130 mm x 31 mm 60 mm x 130 mm x 31 mm CYSD 7312CDF angular contact ball bearings
- 80 mm
- Single Row Non-Fill Slot
- 55 mm x 100 mm x 21 mm 55 mm x 100 mm x 21 mm SKF 7211 ACD/HCP4A angular contact ball bearings
- 8 mm
- 52100 BEARING STEEL HEAT TREATED CHROME PLATE
