Tapered Roller Thrust Bearings
The shaft and housing washers and the roller and cage thrust assemblies of tapered roller thrust bearings with cages can be mounted separately. Low friction The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction.
Tapered roller bearings feature tapered inner and outer ring raceways with tapered rollers arranged between them, angled so the surface of the rollers converge at the axis of the bearing. These bearings are unique in that, unlike most bearings that can handle either axial or radial loads, they can handle large amounts of load in both directions.
- SKF BFSB 445870 E/HA1 Tapered Roller Thrust Bearings
- Two-Bolt Base
- 2.7500 in
- SKF BFSB 353291/HA3 Thrust Bearings
- 0.6250 in
- 1000 lb
- SKF BFSB 353263 E/HA3 Needle Roller and Cage Thrust Assemblies
- 1.5000 in
- 2150 lbf
- SKF 353166 C/HA3 Custom Bearing Assemblies
- 70 mm
- 2.9900 in
- SKF 353166 B/HA3 Tapered Roller Thrust Bearings
- 40 mm
- 1830 kgf
- SKF 634059 Thrust Bearings
- 1.3125 in
- 2150 lbf
- SKF 353115 Screw-down Bearings
- 3.1875 in
- 27650 lbf
- SKF BFSB 353327/HA3 Cylindrical Roller Thrust Bearings
- 0.5000 in
- 3-57/64 in
- SKF 353013 A Needle Roller and Cage Thrust Assemblies
- 45 mm
- 21.6 kN
- SKF 353153 Custom Bearing Assemblies
- 3.9375 in
- Non-Expansion Bearing (Fixed)
- SKF BFS-0004 E/HA3 Tapered Roller Thrust Bearings
- 0.9375 in
- 2150 lbf
- SKF 634011 A Thrust Bearings
- 1.1250 in
- 2150 lbf