NSK bearing Trading Co., Ltd

Angular Contact Ball Bearings

In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.

This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.

45 mm x 75 mm x 16 mm 45 mm x 75 mm x 16 mm SKF 7009 ACE/P4AL1 angular contact ball bearings: d : 1.5000 in; radial static load capacity: : 3210 lbf

ISO 7030 ADT angular contact ball bearings: d : 3.5000 in; base width: : 3-1/2 in

ILJIN IJ223077 angular contact ball bearings: d : 0.9375 in; radial dynamic load capacity: : 3150 lbf

15 mm x 28 mm x 7 mm 15 mm x 28 mm x 7 mm NTN 7902UG/GMP4 angular contact ball bearings: d : 20 mm; overall length: : 93.7 mm

85 mm x 110 mm x 13 mm 85 mm x 110 mm x 13 mm NTN 7817C angular contact ball bearings: d : 1.3750 in; radial dynamic load capacity: : 2150 lbf

Toyana 3216-2RS angular contact ball bearings: d : 1.1875 in; radial dynamic load capacity: : 6020 lbf

Toyana Q316 angular contact ball bearings: d : 0.5000 in; radial static load capacity: : 13500 lb

90 mm x 160 mm x 30 mm 90 mm x 160 mm x 30 mm NKE 7218-BECB-MP angular contact ball bearings: d : 2.9375 in; housing material: : Cast Iron

Toyana 7305C angular contact ball bearings: d : 2.4375 in; base width: : 2.7000 in

65 mm x 120 mm x 38.1 mm 65 mm x 120 mm x 38.1 mm NACHI 5213 angular contact ball bearings: d : 45 mm; maximum pv value: : Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s

ISO 3216-2RS angular contact ball bearings: compatible bearing type: : Spherical Roller

90 mm x 115 mm x 13 mm 90 mm x 115 mm x 13 mm NTN 5S-7818CG/GNP42 angular contact ball bearings: d : 1.2500 in; seal type: : Single Lip Contact with Flinger