Angular Contact Ball Bearings
In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.
- Toyana 7034 CTBP4 angular contact ball bearings
- 3.2500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- ISO 7319 CDB angular contact ball bearings
- 42 mm
- 49 N/mm2;Static 137 N/mm2
- AST 7034AC angular contact ball bearings
- 2 in
- 10 to 220 ºF
- 65 mm x 90 mm x 13 mm 65 mm x 90 mm x 13 mm SKF 71913 CE/HCP4A angular contact ball bearings
- 4.5000 in
- Double Sealed
- 130 mm x 280 mm x 58 mm 130 mm x 280 mm x 58 mm SKF QJ 326 N2MA angular contact ball bearings
- Tapered Roller
- 4.0000 in
- ISO 7228 BDF angular contact ball bearings
- Four-Bolt Square
- Graphite
- 70 mm x 125 mm x 24 mm 70 mm x 125 mm x 24 mm NTN 7214C angular contact ball bearings
- 75 mm
- Contact with Flinger