Deep Groove Ball Bearings
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
- 12 mm x 30 mm x 8 mm 12 mm x 30 mm x 8 mm SKF 16101 deep groove ball bearings
- 2.2500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- SNR UC314 deep groove ball bearings
- 1.6875 in
- 5.6875 in
- Toyana 6214 deep groove ball bearings
- 0.7500 in
- 1400 lb
- 6 mm x 19 mm x 6 mm 6 mm x 19 mm x 6 mm KOYO SV 626 ZZST deep groove ball bearings
- 3.2500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- 30 mm x 72 mm x 19 mm 30 mm x 72 mm x 19 mm KOYO 6306Z deep groove ball bearings
- 95 mm
- Without Snap Ring
- 5 mm x 11 mm x 5 mm 5 mm x 11 mm x 5 mm ZEN S685-2Z deep groove ball bearings
- 3.5000 in
- 32200 lbf
- 5 mm x 13 mm x 4 mm 5 mm x 13 mm x 4 mm ISB SS 619/5-ZZ deep groove ball bearings
- 2.5500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che