NSK bearing Trading Co., Ltd

Deep Groove Ball Bearings

Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

105 mm x 130 mm x 13 mm 105 mm x 130 mm x 13 mm ZEN S61821 deep groove ball bearings: d : 1.2500 in; radial static load capacity: : 3460 lbf

50 mm x 72 mm x 12 mm 50 mm x 72 mm x 12 mm FBJ 6910ZZ deep groove ball bearings: d : 3/8 in; bearing material: : Sintered Bronze Oil-Impregnated

24 mm x 40 mm x 8 mm 24 mm x 40 mm x 8 mm KBC BR2440 deep groove ball bearings: d : 1.3125 in; radial dynamic load capacity: : 5820 lbf

28,575 mm x 62 mm x 38,1 mm 28,575 mm x 62 mm x 38,1 mm FYH UC206-18 deep groove ball bearings: d : 85 mm; radial dynamic load capacity: : 2150 lbf

10 mm x 26 mm x 8 mm 10 mm x 26 mm x 8 mm ZEN 6000 deep groove ball bearings: series: : 01

400 mm x 600 mm x 90 mm 400 mm x 600 mm x 90 mm Timken 9180K deep groove ball bearings: d : 2.2500 in; base width: : 2-9/16 in

65 mm x 140 mm x 33 mm 65 mm x 140 mm x 33 mm CYSD 6313 deep groove ball bearings: d : 1.4375 in; radial dynamic load capacity: : 5820 lbf

30 mm x 62 mm x 16 mm 30 mm x 62 mm x 16 mm NKE 6206-N deep groove ball bearings: d : 2.9375 in; bearing style: : Flange Cartridge

5 mm x 8 mm x 2 mm 5 mm x 8 mm x 2 mm NSK MR 85 deep groove ball bearings: d : 2.1250 in; radial dynamic load capacity: : 12900 lbf

6.35 mm x 12.7 mm x 5.558 mm 6.35 mm x 12.7 mm x 5.558 mm SKF D/W RW188 R-2Z deep groove ball bearings: d : 2.1250 in; housing material: : Cast Iron

80,000 mm x 170,000 mm x 39,000 mm 80,000 mm x 170,000 mm x 39,000 mm NTN 6316Z deep groove ball bearings: shaft diameter: : 3.2000 in; typical application: : Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che

Toyana 619/8-2RS deep groove ball bearings: d : 6.7500 in; static load capacity: : 310000 lbf