NSK bearing Trading Co., Ltd

Deep Groove Ball Bearings

Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

8 mm x 22 mm x 9,8 mm 8 mm x 22 mm x 9,8 mm Timken 38KTD deep groove ball bearings: mounting: : Two-Bolt Base; length through bore: : 1.5625 in

240 mm x 360 mm x 56 mm 240 mm x 360 mm x 56 mm SKF 6048 deep groove ball bearings: d : 70 mm; base width: : 2.9900 in

2,5 mm x 8 mm x 2,8 mm 2,5 mm x 8 mm x 2,8 mm ISO FL60/2,5 deep groove ball bearings: roller diameter: : 2.7500 in; closure type: : Sealed

22 mm x 56 mm x 16 mm 22 mm x 56 mm x 16 mm KOYO 63/22-2RU deep groove ball bearings: d : 3.0000 in; base width: : 2.9800 in

45 mm x 75 mm x 16 mm 45 mm x 75 mm x 16 mm KBC 6009UU deep groove ball bearings: shaft diameter: : 4.5625 in; typical application: : Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che

35 mm x 47 mm x 7 mm 35 mm x 47 mm x 7 mm SKF W 61807-2Z deep groove ball bearings: overall length: : 50 mm; lock nut number: : KM17

5 mm x 19 mm x 6 mm 5 mm x 19 mm x 6 mm ISB SS 635 deep groove ball bearings: mounting: : Two-Bolt Base; maximum operating temperature: : 200 °F

65 mm x 90 mm x 13 mm 65 mm x 90 mm x 13 mm NSK 6913NR deep groove ball bearings: d : 55 mm; static load capacity: : 47500 N

12.7 mm x 22.225 mm x 7.142 mm 12.7 mm x 22.225 mm x 7.142 mm SKF D/W R6-5-2ZS deep groove ball bearings: d : 2.9375 in; base width: : 3.3800 in

360 mm x 540 mm x 82 mm 360 mm x 540 mm x 82 mm ISO 6072 deep groove ball bearings: d : 60 mm; radial dynamic load capacity: : 5350 kgf

Toyana 61805 ZZ deep groove ball bearings: d : 1.2500 in; radial dynamic load capacity: : 4410 lbf

40 mm x 80 mm x 18 mm 40 mm x 80 mm x 18 mm NTN 6208ZC3 deep groove ball bearings: d : 0.4375 in; radial static load capacity: : 5350 lbf