Deep Groove Ball Bearings
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery.
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
- INA RAE30-NPP-B deep groove ball bearings
- 65 mm
- 7330 lb
- 70 mm x 90 mm x 10 mm 70 mm x 90 mm x 10 mm ZEN S61814-2RS deep groove ball bearings
- 1.3750 in
- Single Lip Contact with Flinger
- 15 mm x 24 mm x 5 mm 15 mm x 24 mm x 5 mm SKF 61802 deep groove ball bearings
- 5.1875 in
- 3.8740 in
- 10 mm x 26 mm x 8 mm 10 mm x 26 mm x 8 mm ZEN 6000-2Z deep groove ball bearings
- 3.0000 in
- 053893044606
- Toyana MR036 deep groove ball bearings
- 2.9375 in
- 3.0000 in
- 110,000 mm x 240,000 mm x 117 mm 110,000 mm x 240,000 mm x 117 mm NTN UC322D1 deep groove ball bearings
- 3.1875 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- 25 mm x 52 mm x 15 mm 25 mm x 52 mm x 15 mm ISO L25 deep groove ball bearings
- 5.1910 in
- Stainless Steel
- Toyana 604-2RS deep groove ball bearings
- 15 mm
- 2150 lbf
- 28,000 mm x 52,000 mm x 12,000 mm 28,000 mm x 52,000 mm x 12,000 mm NTN 60/28ZZNR deep groove ball bearings
- 6.1250 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che